DIY SUCCESS - INSTALLING YOUR NEW SHOWER UNIT PROPERLY

DIY Success - Installing Your New Shower Unit Properly

DIY Success - Installing Your New Shower Unit Properly

Blog Article

Call Us Now



How do you feel on the subject of How to Build a Shower Enclosure for Your DIY Bathroom?


How to Install a Freestanding Shower Unit
A successful shower setup calls for cautious preparation and also a great deal of job. For the most part, you will require to do 3 types of tasks: mounting wall surfaces, mounting the plumbing, as well as completing walls.

Prep work


Firstly, you should decide on the sort of shower that you wish to set up. It is necessary to ascertain whether the selected shower is capable of dealing with particular systems and can control a secure level of water via the central heating boiler. Many shower systems nowadays are made to be flexible to various water stress (such as kept warm water and also chilly mains).
It is likewise crucial to take into consideration the water stress and the planning of the piping and drain for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be linked to the bathroom faucet as per your requirement, as well as the water temperature can be readjusted by means of the taps. Push-on mixers are cheap as well as very straightforward to mount. Nonetheless, although the tube connection is basic, it is quickly dislodged. Furthermore, it is inconvenient to change the temperature.

  • Bath/Shower Mixer: The hose pipe as well as spray of this sort of shower are incorporated with a bathroom mixer faucet, and the temperature can be changed with the bathroom taps. It is a very affordable alternative and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers also struggle with inconvenient temperature level control alternatives.

  • Manual Mixer: The hose and spray of a hands-on mixer shower unit are a part of the wall unit and also the hot and cold water products are attached to a solitary valve The temperature and also stress of the water are managed via either one or a variety of knobs (in a lot more costly showers). Although temperature level control is much easier in hands-on mixer types, they are extra pricey than the previously stated mixers. They likewise call for added plumbing of hot and cold water pipes.

  • Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall unit and the hot and cold water products are linked to a solitary shutoff here too. It is complete with a built-in stabiliser to self-adjust the water temperature as well as to prevent it from coming to be also hot. One of the biggest advantages of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most pricey of the various mixer options.

  • Power Shower: A power shower is a single system consisting of an effective electrical pump that can modifying both the water stress and also temperature level. This type of shower can be fitted if there is water supply from a cold water cistern and also a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature level very easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a mix central heating boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and also it warms the water electrically. It is important to keep in mind that for this shower kind to be set up, the keys stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit allows the temperature level and pressure to be changed through a knob. Designs with temperature stabilisers are better as they remain unaffected by various other faucets elsewhere in use within the home. A significant disadvantage of electrical showers is that the control knob only allows for the choice of high temperatures at less stress, or lower temperature levels at a better stress. This is problematic in the winter season when the spray is typically weak and also the mains water is colder. Nonetheless, this trouble is dealt with in some models which are available with a winter/summer setting.


  • Technique


    Depending upon the kind of shower you want to set up, the shower head need to either be suited order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check valve.
    Prior to starting, it is recommended to mark the settings of the shower head as well as control, and also to plan the pipe-work entailed. Additionally, the drain system to get rid of the waste water will need to be intended. Both positions of the cable path and the shower switch will certainly likewise need to be taken into consideration if an instant or electrical shower system is being set up.
    Utilize the direction guide provided with the shower unit to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the supply of water. In order to secure the pipes, they should be provided a water-proof covering as well as additionally fitted with separating valves. The pipes can then be buried into the wall and plastered over to neaten the total look.
    Fit the base tray, shower head, and also installations.
    Attach the major shower control to the pipelines that will certainly be supplying the water (This might call for a women screw thread adapter).
    Reconnect the water system and test the pipes for any type of leaks, as some may need tightening up.
    If you are setting up an electrical shower, keep in mind to switch off the electrical power supply before making any electric connections. As soon as these links have been made (there should be support within the user's manual), the power supply can be switched back on.

    Readjusting Water Pressure to Match Your Shower


    The cold water tank can be lifted to a greater height (sometimes as low as 150mm (6inches)) by fitting a strong wood support beneath it - possibly made up of struts and blockboards. If you pick this choice, the primary and circulation pipelines will certainly additionally need to be elevated to satisfy the new elevation of the reservoir.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked right into the power supply in order to run.

    Piping as well as Drain


    It is best to use 15mm diameter supply pipelines, and make the go to the shower as brief as well as straight as feasible so as to preserve maximum stress and minimise warmth loss. Furthermore, by reducing making use of elbow joints for pipeline corners, you can lower the resistance in the circulation of the supply of water. You can attain this by bending the pipelines instead.

    A Lot Of Usual Errors


  • Breaching or disregarding regional code restrictions.

  • Utilizing pipelines that are also small.

  • Affixing copper to galvanized without making use of a brass or dielectric fitting between both.

  • Not using tape or pipe substance at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not mounting an air gap filling up for components.

  • Cutting supply stub outs as well brief to install the shutoff valves onto after the completed wall remains in area.

  • Not properly lining up tubes right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly trigger a leak.).

  • When turning the water back on in your house, constantly run the outside hose pipe shutoff or flush your bathrooms to hemorrhage dust and air from the lines. This debris can trigger troubles in your sink taps and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    I have been very enthusiastic about How to Install a One-Piece Shower Unit and I hope you appreciated our blog entry. So long as you liked our page if you please make sure you remember to pass it around. I praise you for your time. Don't forget to check up our website back soon.




    View More


    Report this page